Features
Specification
Face mill holder equips with screw and drive keys to assemble the face mill cutter to the holder.
When ordering, please specify the draw bolt with inch size or metric size.
Face mill cutter must be ordered separately.
| Model No. | FIG. | D | D1 | D2 | L | L1 | W | H | G | Draw Bolt | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NT30 FMA25.4-020 | 1 | 25.4 | 65 | 33 | 20 | 20 | 9.5 | 13 | M12 | 1/2"-12 M12x1.75P | 0.80 |
| NT30 FMA31.75-020 | 1 | 31.75 | 73 | 40 | 20 | 22 | 12.7 | 13.5 | M12 | 0.90 | |
| NT30 FMA38.1-020 | 1 | 38.1 | 82 | 50 | 20 | 23 | 15.9 | 15 | M16 | 1.20 | |
| NT40 FMA25.4-020 | 1 | 25.4 | 65 | 33 | 20 | 20 | 9.5 | 13 | M12 | 5/8"-11 M16x2.0P | 1.40 |
| NT40 FMA31.75-020 | 1 | 31.75 | 73 | 40 | 20 | 22 | 12.7 | 13.5 | M12 | 1.50 | |
| NT40 FMA38.1-020 | 1 | 38.1 | 82 | 50 | 20 | 23 | 15.9 | 15 | M16 | 2.10 | |
| NT40 FMA50.8-020 | 1 | 50.8 | 95 | 65 | 20 | 24 | 19.05 | 16 | M16 | 2.50 | |
| NT40 FMA47.625-020 | 2 | 47.625 | 128.57 | - | 20 | 32 | 25.4 | - | - | 3.90 | |
| NT50 FMA25.4-020 | 1 | 25.4 | 65 | 33 | 20 | 20 | 9.5 | 13 | M12 | 1"-8 M24x3.0P | 3.30 |
| NT50 FMA31.75-020 | 1 | 31.75 | 73 | 40 | 20 | 22 | 12.7 | 13.5 | M12 | 3.30 | |
| NT50 FMA38.1-020 | 1 | 38.1 | 82 | 50 | 20 | 23 | 15.9 | 15 | M16 | 3.60 | |
| NT50 FMA50.8-020 | 1 | 50.8 | 95 | 65 | 20 | 24 | 19.05 | 16 | M16 | 4.20 | |
| NT50 FMA47.625-024 | 2 | 47.625 | 128.57 | - | 24 | 32 | 25.4 | - | - | 5.30 |
Unit: mm
Home
Products
Telephone
Message